Just discussed this build in another thread but in the interest of not hijacking it, I'm posting a few pix here.
Here's my first honey build. I went a tiny bit unconventional (for me at least) with the guides on this one: I added one guide above the norm (10 instead of the length rounded up + 1 rule = 9 for a 7'6") and ended up as small as 2/0 for the last couple before the tip top.
It just came off the drying rack so I've only had a chance to cast it a few times in the backyard with a Barrio Small Stream WF4 on it and loved it. Nice, smooth, and feels accurate. I'm looking forward to putting this into my rotation early next year.
Side note: I promised jegstar a detailed post on how I worked thru designing and adding factory replica markings as a dry transfer to an SA System 5 refurbish I posted about here:
viewtopic.php?f=6&t=72979I still have that on my to-do list and I'll include a discussion on how I did the somewhat unconventional Lami marking on this build (spoiler: this was a water slide decal coated with acrylic before I trimmed and applied it).